Watersafe Lead Test Kit

Item #: W503-6831
Manufacturer: Silver Lake Research
Manufacturer Item #: WS-207
Product Type: Lead Test Kit
Your Price: $9.95

ADD TO CART

Watersafe Lead Test Kit is accurate, easy-to-use and produces results on the spot!

Watersafe Lead Test Kit is a one-step test kit that can detect dissolved lead at levels below the EPA Action level of 15 parts per billion (ppb).

Lead from pipes can leach into household water used for drinking, cooking and washing. Many homes and buildings have pipes and plumbing fixtures that contain lead. Lead can leach from pipes into household water, making this plumbing a major source of water contamination and a potential source of toxic lead poisoning. Lead is so toxic that even very low levels may be dangerous.

Lead Test Directions...

• Open Lead packet and take out contents. The packet contains a test vial, a dropper pipette, one Watersafe® lead test strip, and a desiccant (to be discarded).
• Using dropper, Place water sample into test vial. To pick up the sample, tightly squeeze the bulb at the end of the dropper and place the open end into the water sample. Release the bulb to pick up the sample, then squeeze again to expel the sample into the vial. Use only ONE dropper full of water!
• Swirl vial gently for several seconds. Place on a flat surface
• Place both test strips into the test vial, with arrows pointing DOWN.
• Wait 10 minutes. DO not disturb strips or vial during this time. Blue lines will appear on the strips.
• Take the strips out of the vial and read results.